Flash
Install a firmware on the pedal.
- Plug the pedal in. It can run any firmware, or be in update mode.
- Under Choose a firmware, pick one:
- The bundled firmwares come with Launchpad: NAM Loader and Dreamcatcher, at the versions this Launchpad was tested with.
- More from the catalog lists firmwares from OpenGP5’s catalog. Launchpad downloads the one you pick and checks it against the catalog. Firmwares not made by OpenGP5 are marked Not reviewed.
- Your own file: drop a
.binon the page, or choose one. - Valeton’s firmware: V1.0.6, downloaded from Valeton’s site.
- Read what it says about the pedal’s data, tick the box, and click Flash firmware.
The pedal restarts into update mode by itself, the new firmware is written, and the pedal restarts again (about 40 seconds). Keep it plugged in until Launchpad says it’s back.
What’s kept
- The same firmware, a newer version: its presets, captures and settings stay.
- A different firmware: the old one’s data is wiped. Launchpad offers a backup first.
- Leaving Valeton’s firmware: Launchpad reminds you to export SnapTones and user IRs in Valeton Suite; it can back up only the 100 presets.
Every image is checked before anything is written: that it’s complete, that it’s for the GP-5, and what it is.
If a flash fails, see Recovery.