Launchpad

The desktop app for the GP-5. Flash firmware, load captures and IRs, edit presets live, and back up the pedal.

Launchpad connects to the pedal over USB and shows the tools that fit what the pedal runs: Valeton’s firmware or any firmware built on OpenGP5. It runs on macOS, Windows and Linux.

PageWhat you do thereWorks with
HomeSee what the pedal runs and what’s on iteverything
FlashInstall a firmware: one that comes with Launchpad, one from the catalog, your own build, or Valeton’severy firmware, and a pedal in update mode
TonesLoad NAM captures and cab IRs, pair them, set gate and EQNAM Loader
PresetsEdit Dreamcatcher’s 8 presets live, or Valeton’s 100Dreamcatcher, Valeton’s firmware
LiveChange any firmware’s settings as you playOpenGP5 1.0 firmwares
BackupsSave everything on the pedal to one file, and restore itevery firmware
ModsSmall changes to Valeton’s firmware, with undoValeton’s firmware V1.0.6
DeveloperThe pedal’s log, and how busy each processor isOpenGP5 0.7+ firmwares
SettingsTheme, update check, recovery steps

Install

Download the file for your computer from Launchpad’s releases:

SystemFile
macOS, Apple siliconOpenGP5 Launchpad-…-arm64.dmg
macOS, IntelOpenGP5 Launchpad-….dmg
WindowsOpenGP5 Launchpad Setup … x64.exe (installer), or …-win.zip (x64) / …-arm64-win.zip (ARM64)
Linux.AppImage or .deb: x86_64 / amd64 for most PCs, arm64 for ARM

Launchpad isn’t signed, so the system warns you the first time you open it:

  • macOS: right-click the app, choose Open, then Open again. If macOS says the app is damaged, run this once in Terminal:

    xattr -cr "/Applications/OpenGP5 Launchpad.app"
    
  • Windows: on “Windows protected your PC”, click More info, then Run anyway.

  • Linux: make the AppImage executable (chmod +x), or install the .deb.

Connect

Plug the pedal in and open Launchpad. It finds the pedal by itself; Home shows what it runs.

If Launchpad says MIDI access isn’t available, click Restart Launchpad in the banner. The computer’s MIDI service is sometimes not ready when the app starts.

Updates

Launchpad checks for a newer version when it starts, and shows a banner when there is one. Installing it is your choice: the banner opens the download. You can turn the check off in Settings.

Valeton’s firmware

Nothing of Valeton’s comes with Launchpad. When you need Valeton’s firmware (to flash it back, for its preset names, or for a mod), Launchpad downloads it from Valeton’s own site, accepts it only if it is exactly version V1.0.6, and keeps it on your computer.

Try it without a pedal

Launchpad can run against a simulated pedal, for a look around: see Build from source.


Flash

Install a firmware on the pedal.

Tones

Load NAM captures and cab IRs onto the pedal, pair them, and set each capture’s gate and EQ.

Presets

Edit Dreamcatcher’s presets live, or browse and edit Valeton’s 100 presets.

Live

Change the settings of any OpenGP5 firmware while you play.

Backups

Save everything on the pedal to one file, and put it back.

Mods

Small changes to Valeton’s firmware, applied to your own copy, with undo.

Developer

The pedal’s log, and how busy each processor is. For firmware authors.