Get started

Put a firmware on your pedal in a few minutes, without installing compilers.

Flashing a firmware takes about a minute and needs only the pedal, a USB cable and a computer. Choose one way:

WayGood forNeeds
Launchpadmost people: flashing, plus loading captures, presets and backupsthe app, on macOS, Windows or Linux
Web flashertrying a firmware quicklyChrome, Edge or Opera on a computer
Command linescripts, and your own buildsPython 3

The steps

  1. Read Before you flash. Two minutes: what can go wrong, and what to back up.
  2. Flash a firmware. NAM Loader, Dreamcatcher or the tremolo, or a file you built.
  3. Play. Each firmware’s page explains its controls.

If anything goes wrong, Recovery gets the pedal back, and it also explains how to return to Valeton’s firmware.

Next


Before you flash

What can go wrong, how likely it is, and what to back up first.

Flash a firmware

Three ways to put a firmware on the pedal, from the easiest to the most flexible.

Recovery and going back

Get the pedal back after a failed flash, and return to Valeton’s firmware.